DIY Mold Removal Guide for Concrete Pavements

Water stops and other moisture barriers are commonly installed beneath concrete foundations; however, these can wear out and deteriorate over time. They can also become defective or break under extreme conditions. In the case that water and moisture get into the foundation of concrete walls or floors, there is a chance that both mildew and fungal growth can occur. No one wants mold growth anywhere on their properties, so when it becomes apparent, immediate action is required. Stopping mold growth in its tracks can greatly reduce the need for costly repairs, restorations, and reconstruction.

Continue reading and learn how to remove mold and mildew from concrete floors, walls, and other surfaces.

Indianapolis Concrete Pavement Contractors
Indianapolis Concrete Pavement Contractors 317-549-1833

Mold Removal Process for Concrete Surfaces

The process of cleaning mold off of concrete is fairly straight-forward and therefore easy; however, it does require some initial grunt work. Be prepared to sweat a little when it’s time to scrub mold and mildew out of concrete. It doesn’t require a lot of tools either; simply locate a hard-bristled scrubbing brush, household bleach, clean water, and protective cleaning gloves. Combine the bleach and cold water (1 part bleach to 4 parts water) and liberally apply the solution to the affected area. Once the area is saturated, use the scrubbing brush to powerfully brush and rub out the mold from the concrete.

Once you have finished scrubbing in this solution, allow it to set it for a few hours; longer if the mold is extensive. Finish with a thorough rinse using fresh clean water. Use room-temperature or cold water so to not promote future mold growth. Heat, moisture, and shade is all it takes for mold and fungus to form. It is best to use a power washer to rinse the bleach solution away because the pressure of the water works well to thoroughly rinse away the remaining particles.

For Very Serious Mold-Damaged Pavements

If you prefer to not handle bleach or concoct your own solution, you can choose to purchase a store-brand mold-killing detergent. Although store-bought, they provide the same results and require the same steps. For severe cases of mold, it is best to outsource professional concrete repair or replacement services. If you want great pavements all year long, be sure you choose a certified pro to install, repair, and protect your concrete.

Are you looking for commercial pavement services in Indiana? Contact ACI Asphalt and Concrete at 317-549-1833 to speak with one of our licensed paving contractors about your Indianapolis, Indiana commercial concrete repair or installation needs.

You Might Also Enjoy:

The Benefits of Commercial Concrete Curbing
Causes and Cures for Concrete Cracks
Can You Pave Asphalt Over Concrete?

Indianapolis Pavement Repair Company
Indianapolis Pavement Repair Company 317-549-1833

How to Remove Mold on Concrete Pavement

Water stops and other moisture barriers are commonly installed beneath concrete foundations; however, these can wear out and deteriorate over time. They can also become defective or break under extreme conditions. In the case that water and moisture seeps into the foundation of concrete walls or floors, there is a chance that mildew growth can occur. No one wants mold growth anywhere on their properties, so when it becomes apparent, immediate action is required. Stopping mold growth in its tracks can greatly reduce the need for costly repairs, restorations, and reconstruction.

Continue reading and learn how to remove mold and mildew from concrete floors, walls, and other surfaces.

Indianapolis Commercial Paving
Indianapolis Commercial Paving 317-549-1833

Eliminating Mold on Concrete

The process of cleaning mold off concrete is fairly straight-forward an easy; however, it does require some initial grunt work. Be prepared to sweat a little when it’s time to scrub mold and mildew out of concrete. It doesn’t require a lot of tools either; simply locate a hard-bristled scrubbing brush, household bleach, clean water, and protective cleaning gloves. Combine the bleach and cold water (1 part bleach to 4 parts water) and liberally apply the solution to the affected area. Once the area is saturated, use the scrubbing brush to powerfully brush and rub out the mold from the concrete.

Once you have finished scrubbing in this solution, allow it to set it for a few hours; longer if the mold is extensive. Finish with a thorough rinse using fresh clean water. Use room-temperature or cold water so to not promote future mold growth. Heat, moisture, and shade is all it takes for mold and fungus to form. It is best to use a power washer to rinse the bleach solution away because the pressure of the water works well to thoroughly rinse away the remaining particles.

If you prefer to not handle bleach or concoct your own solution, you can choose to purchase a store-brand mold-killing detergent. Although store-bought, they provide the same results and require the same steps. For severe cases of mold, it is best to outsource professional decorative concrete contractors for industry-safe mold removal services. It is not safe to appoint an in-house janitorial staff to clean a mold problem.

Mold and mildew removal requires professional equipment, specialized training, and comprehensive procedures. This includes inspections, clean up and removal, hygienic maintenance, testing, insurance, and more. You don’t want to put your investment at risk, but more importantly, you do not want to put anyone’s health at risk. Proper mold removal is vital to protect property value, safety, and appeal.

Concrete Restoration and Replacement

In some cases, concrete is too damaged by mold and mildew growth. When this happens, the best course of action is to have your concrete pavements replaced with new concrete. Be sure to choose a qualified and licensed commercial paving company to provide trusted concrete overlays and repair services you can afford.

Commercial Concrete Repair and Replacement

Call ACI Asphalt and Concrete at 317-549-1833 for licensed, bonded, and insured concrete repair and replacement services in Indianapolis, Indiana. We offer a wide range of asphalt and concrete paving services for commercial and industrial properties, at the most competitive prices in town, including inspections, installation, replacement, repair, and more. Request a free quote, today.

Can Concrete Pavement Get Moldy?

Concrete is a permeable pavement; meaning it is porous and vulnerable to moisture and water seepage. When it comes to mold, there are only three requirements to make a perfect environment for growth: water, dirt, and darkness. Overtime, a combination of these three things will produce mold growth. Plumbing, rooftops, crawl spaces, and more are common areas for mold growth on a residential or commercial property. As far as concrete pavement goes, mold makes no exceptions. Concrete pavement is susceptible to mold and mildew, as long as the conditions for it are just right.

Continue reading to learn more about concrete mold growth and how to clean it, safely and effectively.

Indianapolis Concrete Repair 317-549-1833
Indianapolis Concrete Repair 317-549-1833

Moldy Concrete

As mentioned before, concrete is a permeable paving material. It retains numerous pores, holes, nooks, crannies, crevices, and more. All of these minuscule openings can hold water, and never see much light or warmth. This is the perfect recipe for mold incubation. For cities with wet and humid climates or seasons, mold can certainly be a problem for property owners.

Moist, warm weather increases the rate of mold growth. It is important to always keep concrete clean to reduce the likelihood of mildew and fungal growth. Keeping concrete dry and moisture-free is another method to reducing mold. It is recommended to lower the level of humidity indoor, to protect indoor concrete pavement. Outdoor concrete pavements will require a higher level of attention since we cannot control the level of humidity outside.

Cleaning Mold

Fortunately, mold can be removed and cleaned from concrete with a few simple steps. When you see mold on your driveway or other concrete pavement, you can opt for an over-the-counter mold-killing detergent, or you can make your own solution with bleach and water. Either way, some thorough scrubbing action, followed by an extended soak-time and a rinse, can get the job done. It is best to use a power washer to rinse concrete after washing. The water pressure helps to cleanse the actual pores of the concrete, further ensuring the mold is completely gone.

For commercial and industrial properties, it is standard to contact a licensed pavement repair contractor for accurate mold removal services and concrete maintenance. They retain the proper equipment and industry knowledge to efficiently and effectively service concrete.

Indianapolis Asphalt and Concrete Professionals

Call ACI Asphalt and Concrete at 317-549-1833 for commercial pavement repair work in Indianapolis, Indiana. Our licensed and qualified paving contractors provide several Indianapolis asphalt and concrete paving services, including pavement repair, sealcoating, road work, commercial paving, industrial paving, winter cold patching, and more. We are the industry veterans to trust for skilled craftsmanship and competitive prices! Request a free estimate, today.