How to Remove Mold on Concrete Pavement

Water stops and other moisture barriers are commonly installed beneath concrete foundations; however, these can wear out and deteriorate over time. They can also become defective or break under extreme conditions. In the case that water and moisture seeps into the foundation of concrete walls or floors, there is a chance that mildew growth can occur. No one wants mold growth anywhere on their properties, so when it becomes apparent, immediate action is required. Stopping mold growth in its tracks can greatly reduce the need for costly repairs, restorations, and reconstruction.

Continue reading and learn how to remove mold and mildew from concrete floors, walls, and other surfaces.

Indianapolis Commercial Paving
Indianapolis Commercial Paving 317-549-1833

Eliminating Mold on Concrete

The process of cleaning mold off concrete is fairly straight-forward an easy; however, it does require some initial grunt work. Be prepared to sweat a little when it’s time to scrub mold and mildew out of concrete. It doesn’t require a lot of tools either; simply locate a hard-bristled scrubbing brush, household bleach, clean water, and protective cleaning gloves. Combine the bleach and cold water (1 part bleach to 4 parts water) and liberally apply the solution to the affected area. Once the area is saturated, use the scrubbing brush to powerfully brush and rub out the mold from the concrete.

Once you have finished scrubbing in this solution, allow it to set it for a few hours; longer if the mold is extensive. Finish with a thorough rinse using fresh clean water. Use room-temperature or cold water so to not promote future mold growth. Heat, moisture, and shade is all it takes for mold and fungus to form. It is best to use a power washer to rinse the bleach solution away because the pressure of the water works well to thoroughly rinse away the remaining particles.

If you prefer to not handle bleach or concoct your own solution, you can choose to purchase a store-brand mold-killing detergent. Although store-bought, they provide the same results and require the same steps. For severe cases of mold, it is best to outsource professional decorative concrete contractors for industry-safe mold removal services. It is not safe to appoint an in-house janitorial staff to clean a mold problem.

Mold and mildew removal requires professional equipment, specialized training, and comprehensive procedures. This includes inspections, clean up and removal, hygienic maintenance, testing, insurance, and more. You don’t want to put your investment at risk, but more importantly, you do not want to put anyone’s health at risk. Proper mold removal is vital to protect property value, safety, and appeal.

Concrete Restoration and Replacement

In some cases, concrete is too damaged by mold and mildew growth. When this happens, the best course of action is to have your concrete pavements replaced with new concrete. Be sure to choose a qualified and licensed commercial paving company to provide trusted concrete overlays and repair services you can afford.

Commercial Concrete Repair and Replacement

Call ACI Asphalt and Concrete at 317-549-1833 for licensed, bonded, and insured concrete repair and replacement services in Indianapolis, Indiana. We offer a wide range of asphalt and concrete paving services for commercial and industrial properties, at the most competitive prices in town, including inspections, installation, replacement, repair, and more. Request a free quote, today.

The Top-Most Recommended Concrete De-Icer

Concrete Repair Indianapolis Indiana

Concrete Repair 317-549-1833

When it comes to choosing a concrete deicing product, most people look for melting power. So it is no surprise that calcium chloride pellets are the top-most recommended material to use for winter pavement management. This substance is so powerful, it can still melt ice and snow in temperatures below freezing; in fact, up to negative 40 degrees Fahrenheit! But as for concrete deicers, there is more to consider aside from melting power.

You must also think about your surrounding environment, the condition of your pavement, seasonal temperatures, and even the corrosive agents in the deicing product you choose to apply to your concrete pavements. Although calcium chloride offers incredible melting power, it may not be a suitable choice for everyone. Continue reading to learn more about calcium chloride deicers and winter concrete care.

Benefits of Calcium Chloride Deicer

As a hygroscopic compound, calcium chloride absorbs moisture. When applied to snow and ice, it begins to immediately dissolve and absorb all the moisture on the pavement. As it dissolves, the calcium chloride uses an exothermic process that generates heat up to 140 degrees Fahrenheit. This is why the results are so sudden.

Calcium chloride is better than sodium chloride, or “rock salt”, in terms of environmental care and protection. It is less harmful to the surrounding plant life and soil in the case of water run-off. It is also less corrosive, so it is a suitable deicing solution for older pavement.

Disadvantages to Consider

Although calcium chloride is a powerful deicing agent, it comes with a few drawbacks that you should be aware of before applying it to your pavement. First, it melts quickly, so it leaves behind a moderate amount of slush. This slush can re-freeze, or turn into a hazardous in terms of pedestrian slip and falls, as well as, driving accidents. For personal safety and liability, it is best to sweep the slush to the side after application.

Secondly, it is a bit more expensive to deice with calcium chloride. A 50 pound bag sets you back about $18 on average, depending on the retailer. For moderately cold temperatures and conditions, it is recommended to mix calcium chloride with a standard market deicer for a more economical version.

Indianapolis Concrete Repair

Commercial Lot Repair 317-549-1833

Commercial Lot Repair 317-549-1833

Call ACI Asphalt and Concrete Inc. at 317-549-1833 for professional Indianapolis concrete repair and sealcoating you can trust. Owner Lindsey Lewis employs a team of highly-trained and experienced pavers who are licensed, bonded, and insured to perform. We offer a wide range of pavement repair services for commercial, industrial, and municipal properties. Call 314-549-1833 for professional concrete repair in Indianapolis and its surrounding areas.

Hazardous Winter Weather Effects for Roads and Other Pavements

All adverse weather can cause problems for concrete and asphalt pavements, but especially winter weather. There is a substantial increase in moisture and precipitation during the cold season, like rain, ice, and snow. These elements, and other factors, greatly contribute to the natural wear and tear of roads and pavements, as well as, accelerated deterioration and degeneration.

Continue reading to learn about the hazardous effects of winter weather on roads and other types of pavements.

Indianapolis Pavement and Pothole Repair
Indianapolis Pavement and Pothole Repair 317-549-1833

Permeable Pavements

Permeable means porous and penetrable. Many forms of concrete and asphalt are permeable pavements. This means water and moisture can penetrate the surface of pavements and seep deep into the pores. Most asphalt is non-permeable, while other forms of asphalt lack the pertinent aggregate material needed to thwart this occurrence. Concrete on the other hand, is porous and permeable, which is why we often see it in distress during this time of year and after long, harsh, winter seasons. There are benefits of porous pavements in regards to winter weather, but there are many more damages that occur in comparison.

The advantage of porous or permeable pavement in wintertime is that it reduces the accumulation of standing water on roads and walkways. This prevents slippery areas and ice formation that can cause serious car accidents, slips, trips, and falls. Because the water on the surface of the pavement seeps into the pores, it is not flooding the street and freezing into ice.

Damages That Result From Winter Conditions

When water seeps into the pores of any pavement, it is filtered down to the rock bed, along with oil and other substances collected in the water. In the colder seasons, this water eventually freezes, causing the pores in the pavement to expand. When you see cracks, fissures, and crumbling concrete or asphalt, this is mostly likely the cause. The freeze-thaw cycles can greatly deteriorate pavements overtime, or even after just one harsh winter season.

Potholes, cracks, crevices, and crumbling pavement can be seen on sidewalks, curbs, driveways, parking lots, interstates, roadways, and streets everywhere. In order to stop this from happening, we need to continue innovating better technology for commercial and public pavement. This is why it is important for commercial property owners to consult a licensed pavement contractor for accurate and reliable advice regarding the appropriate type of pavement for your particular climate and region.

Winter Cold Patching and Pavement Repair in Indianapolis

Call ACI Asphalt and Concrete at 317-549-1833 for commercial winter cold patching and pothole repair in Indianapolis and its surrounding areas. Our licensed and qualified paving contractors provide a wide range of asphalt and concrete pavement repair and installation services at the most competitive prices in town, including crack filling, overlays, resurfacing, and sealcoating. Request a free estimate, today!

Removing Mildew from Concrete Pavements

Mold and mildew growth can be hazardous to one’s health, and pose many dangerous and unpleasant threats as well. For these reasons and more, mildew should always be removed as soon as it is discovered. It can also be quite unsightly and unattractive. One common area where mold can thrive is concrete, like sidewalks, curbs, driveways, fireplaces, and more. It is understandable to have mold or mildew somewhere on your property you cannot see or reach, but the exposed and attainable areas, like the ones just mentioned, should be cleaned thoroughly.

Continue reading to learn more about the importance of removing mold and mildew from concrete, and how to get it done.

Indianapolis Concrete Repair 317-549-1833
Indianapolis Concrete Repair 317-549-1833

Concrete Mildew Removal

Mildew is slippery, especially when wet, and can cause slip and fall accidents; but the main health concern associated with mildew and mold has to do with our respiratory health. Spores from mold can become airborne, and consequently, be inhaled by people and pets. This can cause or contribute to several respiratory illnesses and conditions; like asthma, allergies, and more.

So when you find mildew growing on your concrete surface, be sure to follow similar instructions to the ones listed below, in order to successfully remove mold and mildew from concrete, cement, and more. If the fungus that causes mildew is not properly killed and removed, the mildew will be sure to come back.

What You’ll Need:

✔ Chlorine Bleach (about 1 Quart per 100 square foot)
✔ 1/3 Cup Powdered Laundry Detergent
✔ Large Bucket
✔ 3 Quarts Warm Water
✔ Running Water
✔ Garden Hose
✔ Stiff Bristled Broom or Brush
✔ Safety Goggles
✔ Rubber Gloves

What To Do:

1. Open Nearby Doors and Windows to For Ventilation (floor fans are best)
2. Put On Safety Goggles and Gloves
3. Mix Bleach and Warm Water
4. Add Powdered Detergent to Bleach/Warm Water Mix
5. Saturate the Affected Area with the Solution
6. Allow Solution to Fully Saturate for 15 minutes
7. Vigorously Scrub the Surface with the Bristled Broom or Brush
8. Turn On Running Water
9. Use Garden Hose to Rinse the Surface Clean
10. Make Sure the Area Dries Thoroughly
11. Repeat Steps 1-10 if Necessary

In order to prevent mildew and mold growth in the future, be sure to mop up excess puddles of standing water, and try to add more sunlight exposure to concrete surfaces. Sun and heat prevents mold and mildew growth. So keep concrete surfaces dry and bright!

Industrial and Commercial Paving Services in Indianapolis

Call ACI Asphalt and Concrete at 317-549-1833 for industrial and commercial concrete pavement repair in Indianapolis, Indiana. Our licensed and qualified paving contractors provide a wide range of asphalt and concrete pavement repair and installation services at the most competitive prices in town, including crack filling, overlays, resurfacing, and sealcoating. Request a free estimate, today!

Why Outsource Concrete Sealing Services

Concrete is a man-made material used in various industries for an infinite amount of uses. It is a combination of lime-enriched cement, sand, gravel, and water. Although concrete is widely used and renders numerous advantages, it is vulnerable to deterioration and damage. For this, concrete must be protected. Harsh weather, severe elements, heavy traffic, and every day wear and tear causes concrete to weaken, crumble, and crack.

Potholes, kettle-holes, chuckholes, and more are all the result of worn-out concrete pavement. The best solution for preventative maintenance is using a concrete sealer. Concrete sealcoating is strongly recommended to add durability, longevity, and even shine to any concrete pavement. Continue reading to learn more.

Commercial Concrete Paving
Commercial Concrete Paving 317-549-1833

Concrete Sealcoating

Concrete is vulnerable to several elements and conditions because it is a porous material. This means moisture and water can seep deep down into the pores of concrete, and create more damage from within. In cold climates, water and moisture within these pores will freeze, thaw, and expand, resulting in crevices, cracks, and potholes. Sealcoating is a fantastic method to preventing the extent of these damages.

It requires the service of a professional Indianapolis Concrete Sealcoating contractor for effective and reliable results. They retain the proper training, tools, and resources to successfully and efficiently carryout concrete sealcoating services for residential and commercial properties. Be sure to use an experienced and licensed contractor, or risk having a sealer applied improperly, ruining the concrete paving job altogether.

Concrete sealers can more than double the lifespan of concrete pavement. Once applied, it can reduce cracking, splitting, crumbling, pitting, and dusting; as well as, stop efflorescence (white powder accumulation), prevent musty odors, and will resist moisture. This means protection against mold, mildew, bacteria, and more.

Concrete sealcoaters can be applied to driveways, decks, patios, basement floors, and all other concrete foundations. There are several types of concrete sealers on the market, so it is suggested to consult a professional concrete contractor for accurate advice on which sealer is right for your project.

Indianapolis Commercial Sealcoating Near You

Call ACI Asphalt and Concrete at 317-549-1833 for commercial sealcoating pavement services in Indianapolis, Indiana. Our licensed and qualified paving contractors provide several Indianapolis asphalt and concrete paving services, including pavement repair, sealcoating, road work, commercial paving, industrial paving, winter cold patching, and more. We are the industry veterans to trust for skilled craftsmanship and competitive prices! Request a free estimate, today.

The Usefulness of Concrete Sealers

Concrete is a man-made commodity used in countless trades all across the globe. It’s produced through the combination of lime cement, sand, gravel, and water. Concrete can be fabricated, molded, and fashioned in infinite ways; which is why it is one of the most commonly used materials in the manufacturing and construction industry. Although concrete is a widely useful product, it can be a victim of the elements. This means concrete is vulnerable to damage and deterioration and requires a certain degree of care and protection. This is where concrete sealers come into play.

Continue reading to learn more about the importance of concrete sealers for commercial and city pavements.

Asphalt Concrete Paving 317-549-1833
Asphalt Concrete Paving 317-549-1833

Concrete Sealing

One of the downsides to concrete is that it is a permeable pavement. This means it is porous. This characteristic alone makes concrete extremely vulnerable to natural elements and more. The holes and crevices within concrete pavement can gather and collect water when it rains or snows. Standing water within concrete will eventually begin to breakdown and cause the concrete to deteriorate. In colder climates, the water will freeze and thaw, causing expansion within concrete slabs and pavements. This results in uneven surfaces, warped concrete foundations, cracks, and fissures. Unfortunately, concrete is susceptible to harsh weather, wear, and tear. This is why concrete sealers are so valuable.

Sealing concrete can more than double its expected lifespan. When laying concrete foundations or flooring, a sealant should always be strongly considered. It will protect and strengthen the surface of the concrete and reduce the amount of damaging effects from elements like wind and water. It prevents splitting, cracking, pitting, crumbling, and dusting. Concrete sealers are moisture-resistant and prevents water damages from occurring. It eliminates the threat of efflorescence (white powder), musty odors, mildew, mold, and more. It protects concrete from salt damage, acid stains, and much more.

Concrete sealers are highly recommended to obtain a clean and sleek finish for concrete foundations and flooring, as well as, roads and walkways with heavy traffic. Concrete seal coating is mostly needed for projects that call for impenetrable foundations; such as warehouse flooring, bridge decks, pool decks, commercial flooring, basements, driveways, parking lots, and more.

Concrete sealers are extremely useful and come highly recommended by professionals. There are several different types of sealers and sealcoating products on the market. In order to find the right one for you, contact a professional Indianapolis Seal Coating contractor for accurate industry advice you can trust. Consulting a licensed concrete repair and installation technician can save you time and money!

Indianapolis Concrete Installation and Repair

Call ACI Asphalt and Concrete at 317-549-1833 for commercial concrete pavement repair services in Indianapolis, Indiana. Our licensed and qualified paving contractors provide several Indianapolis asphalt and concrete paving services, including pavement repair, sealcoating, road work, commercial paving, industrial paving, winter cold patching, and more. We are the industry veterans to trust for skilled craftsmanship and competitive prices! Request a free estimate, today.