Can Asphalt Be Paved in the Rain?

Posted on December 8, 2017 by admin

If you are thinking about repaving your old, asphalt driveway, basketball court, or other paved surface, it is likely that you are filled with questions. This is especially true if you are a beginner paver. The most frequent questions about paving usually involve installation. Interestingly enough, many property owners want to know if asphalt can be paved when it’s raining. Although it is obvious you cannot attempt any type of outdoor work to the best of your abilities when it’s storming outside, compromises can be made depending on the situation. Continue reading to learn more about paving asphalt in the rain.

Indianapolis Asphalt Paving 317-549-1833

Paving and Rain

When we use the term, “rain”, it can mean all sorts of things, like heavy rain, light rain, constant rain, scattered rain, sprinkles, and more. Of course, during times of heavy storms, torrential downpours, and continuous precipitation, a paving operation should be shut down completely until the weather clears.

On the other hand, a few sporadic sprinkles may not be enough to stop a pavement job for the entire day. It all depends on the particular circumstances, including laws that govern this type of work, liability, and personal preference. In order for an asphalt surface to be paved well in light rain, the base must be firm, stable, and well-draining aggregate.

Some states have laws and regulations in order that mandate contractors to stop work upon rain or inclement weather, while others leave it up to the contractor’s personal discretion. Overall, the general industry-accepted standard is to NOT PAVE in rain, regardless of its strength, pattern, and persistence.

Here are some reasons why:

🌧 Paving in rain can result in the aggregate mix to cool too quickly. This can make it challenging, or even impossible, to achieve proper compaction for the job.

🌧 Any type of moisture can inhibit the asphalt lifts from bonding together, which can result in improper compaction, as well as decreased stability and longevity.

🌧 Puddles that are covered with hot mix asphalt will turn the underlying water into steam. Steam will cause the asphalt binder to separate from the aggregate, leading to premature surface defects and blemishes, like potholes, crumbling, and cracking.

Light or Sporadic Rain

If it is already raining, it is best to wait another day to start your asphalt paving project. However, if it begins to rain after you have already begun, you should suspend all work until the rain stops. If the rain is heavy, you will need to wait at least 24 hours for the rain to stop and the surfaces to dry. If the rain is light, you may be able to get back to work the same day. If this is the case, be sure to cover all your equipment and supplies with waterproof tarps, construct a vertical-faced construction joint, safely dispose of any material you have in your machine, and be very careful to not let mud or dirt interfere with your work space.

Professional Paving

Asphalt paving is a complex process that requires a certain skill set and inventory of equipment. It is important to hire professional Indianapolis asphalt paving contractors to install, replace, or repair your asphalt pavement. They retain the hands-on experience, as well as the knowledge, skills, equipment, and resources necessary to deliver long lasting results.

Indianapolis Asphalt Paving

Asphalt Concrete Paving 317-549-1833

Call ACI Asphalt and Concrete at 317-549-1833 for asphalt pavement installation in Indianapolis you can trust. Our team of paving contractors are licensed, bonded, and insured with decades of experience in the pavement industry. Call 317-549-1833 to request a free estimate, today.

What Causes Soil Instability and How Does it Affect Paving Projects?

Posted on October 12, 2017 by admin

Paving contractors can never really know what lies beneath their feet until their project begins. At the start of excavation, contractors can start to learn about the soil, dirt, and clay, and whether or not they foresee running into problems or obstacles. One common problem is unstable soil. This basically means that the dirt is too soft to provide a sufficient foundation for pavement installation. When this happens, pavers must find an alternative solution to get the job done right, and in a safe and reliable manner. Continue reading to learn what causes soil instability and how it affects a paving installation or excavation project.

Asphalt Concrete Paving 317-549-1833

Unstable Soil or Dirt

There are three main issues that cause unstable soil. Decomposing plant life and other organic matter loosen soil and diminish its stability. This is more prevalent when soil is near a body of water or some other source of water.

Another cause, or quality, of unstable soil is reduced compaction or lack of compaction capability. This means that the dirt cannot press into itself, making it stronger and more compact. This is especially common for hills and raised areas that were filled-in with dirt. If the soil is not compacted in thin layers, it cannot present a uniform and even appearance, nor provide a stable foundation for pavement.

The third, and most common, reason for unsteady soil is its make-up or composition. Mineral and element imbalances in dirt can inhibit its ability to compact or provide secure surfaces for asphalt. Soil requires a certain balance of air, water, minerals, and organic matter to be at its most stable. For example, if too much water or moisture is present, then soil becomes mud, which cannot be paved on; and it can take several days and even weeks for mud to dry. Not only would this cause extensive delays in construction, it would cost more money too.

The cause and solution for instable soil largely depends on the circumstance. All cases are different, and it is possible to find several different types of dirt in an excavation. Soil that is not usable must be fixed before any paving can occur.

Here are some solutions that have worked in the past to cure unstable dirt:

• Double-Check for Drainage Problems
• Use Drainage Tiles to Relieve Excess Moisture
• Till Soil to Expedite Drying Time
• Install Soil Separation Fabrics to Reduce Contact with Base Materials
• Install Geo-Grids
• Replace Soil with Proper Base Material in Subgrade
• Chemically-Treat the Soil to Enhance Stability
• Use Foam Asphalt Injections
• Contact a Licensed Asphalt Paving Company for Advice

ACI Asphalt and Concrete in Indianapolis

Parking Lot Paving 317-549-1833

Call ACI Asphalt and Concrete at 317-549-1833 for commercial and industrial asphalt paving services in Indianapolis and its surrounding areas. Our paving contractors provide a wide range of pavement repair and installation services at the most competitive prices in town. Call 317-549-1833 to request a free estimate for Indianapolis paving, today.

ACI Asphalt and Concrete Provides Municipal Paving Solutions That Last

Posted on August 3, 2017 by admin

If your municipality is looking for a trusted pavement repair company, you’ve found them! Talk to our experts about the workable solutions we offer for municipal asphalt and concrete paving service!

Asphalt Concrete Paving 317-549-1833

ACI Asphalt and Concrete Inc. is made up of a fully-qualified team of licensed, bonded, and insured paving contractors who have decades of experience in the pavement repair and service industry. For more than 30 years, we have been a top-choice for Hoosiers all across the state, and have continued to deliver the highest standards of excellence for all municipal paving repair projects. We are fully-equipped with the latest technologies and state of the art equipment, and capable of taking on large-scale projects, regardless of size or scope. Our paving services are comprehensive, and cover a wide range of municipal pavement repairs and services.

Our Municipal Paving Services Include:

⛖ Highway Installation and Repair
⛗ Interstate Installation and Repair
⛖ Parking Lot Installation and Repair
⛗ Eco-Friendly Asphalt Paving
⛖ Sidewalks, Curbs, Steps, ADA Ramps, Etc.
⛗ Commercial Driveways
⛖ Paved Complexes
⛗ Paved Plazas, Squares, Courts, Etc.
⛖ Speed Bumps
⛗ Sealcoating
⛖ Road Striping
⛗ Street Sweeper Service
⛖ Winter Cold Patching
⛗ Block Paving
⛖ Porous Paving
⛗ And Much More

ACI Asphalt and Concrete Inc. has the expertise to provide dependable and proficient municipal paving solutions in a convenient time frame. We use a strict, concentrated approach to planning, managing, and implementing their municipal paving services. This ensures that we deliver the highest level of professionalism, quality, and structural integrity on the job.

We Earn Our Customers Business Everyday

Asphalt Concrete Paving 317-549-1833

Here at ACI, we are truly dedicated to proving superior paving services for the local municipalities throughout Indianapolis. In fact, we are honored to be members of the community, and strive to be your solution to professional, high-quality municipal pavement repair and service. Owner, Lindsey Lewis, and our team of professional pavers will always remain committed to achieving that goal. Contact Us today at 317-549-1833 to request a free estimate.

Solutions for Distressed Asphalt Parking Lots

Posted on April 7, 2017 by admin

You had your commercial asphalt parking lot paved a long time ago, and it has served you well. But now, many years later, it is starting to show signs of wear and tear. Your commercial parking lot is a significant investment, so it understandable how these signs can cause you some concern. The best method for combating asphalt damage is to locate the source and implement the proper remedies. Continue reading to learn how to detect asphalt parking lot damage, and what you can do to fix them.

Indianapolis Asphalt Repair 317-549-1833

Asphalt Damages

The sooner you address asphalt pavement damage, the better your chances are at avoiding larger and more costly problems down the road. The first step is to observe your pavement. Look for cracking, fissures, swells, heaving, standing water, and any other types of structural damage. Keep in mind that some areas of damage can be fixed with a little maintenance, while others may need complete removal and replacement. Here are some common solutions to asphalt parking lot damage:

Expert Installation

– Durable asphalt pavement starts with proper installation, which includes comprehensive planning for grading, drainage, and more. So be sure you hire an experienced and reputable paving company for new parking lot installation.

Preventative Maintenance

– The best method for protecting your asphalt against natural wear and tear starts before it is ever damaged. You can increase the life of your pavement by taking good care of it all year long. That includes regular trash, leaves, and debris removal, sealcoating, and proper drainage.

Minor Repairs

– For small cracks, crevices, and potholes, your pavement can benefit from minor repair. This includes crack filling, pothole patching, and sealing. These minor repairs will keep your asphalt strong and durable.

Removal and Replacement

– For more severe or larger areas of damage, you would best benefit from complete asphalt removal and replacement. This does not include the entire lot, although in some cases it does. Instead, the area of damage is cut out and filled in with new asphalt.

Overlays

– For older parking lots that are still structurally sound, asphalt overlays are a good option to improve the look of the pavement and add years of life. This is a cost-effective alternative to complete parking lot demolition and replacement.

Indianapolis Parking Lot Paving

Asphalt Concrete Paving 317-549-1833

Call ACI Asphalt and Concrete Inc. at 317-549-1833 for professional Indianapolis parking lot paving you can trust. Owner, Lindsey Lewis, and his team of licensed pavers, provide a wide range of commercial, industrial, and municipal paving solutions at competitive prices. Call 317-549-1833 to request a quote, today.

Why Can Soil Become Unstable Below Old Asphalt?

Posted on September 5, 2016 by admin

Often times, paving companies or contractors will begin a paving project, only to find that the soil beneath the old pavement is too soft and not stable enough to take on new material. There are a few common causes for soil instability, all of which can interrupt a paving project. But fortunately, unstable soil can be resolved. It just takes a few extra steps. Continue reading to learn what causes soil instability, and how to fix it for purposes of paving.

Asphalt Concrete Paving 317-549-1833

Causes of Soil Instability

There are three main causes of soil instability: 1) organic presence, 2) lack of compaction, and 3) poor composition. Look below for a brief explanation of each issue.

Organic Presence – The excessive presence of organic matter, especially decomposing organics, can cause soil to soften, making it unstable. This includes insects, leaves, plant matter, and water.

Poor Compaction – When soil lacks compaction, it is weak and does not retain the ability to properly bear weight. Lack of compaction means soil is soft and unable to stabilize for the purpose of bearing weight, such as paving material.

Poor Composition – The make-up of soil has a major influence on its level of stability. When improper levels of essential minerals, namely air, water, and organic matter, are present in soil, it lacks the ability to be strong. Soil needs just the right amount of moisture, matter, and air to be stable for paving.

Paving Over Soil

You cannot add new asphalt paving material on top of an unstable foundation. And soft soil is unstable. Instead, new asphalt paving solutions need to be considered and chosen. Most of the time, soft soil can be resolved, and once they are, paving projects can continue as planned. Various methods for treating soil instability have proven effective, either on their own or in combination with each other. They include practices such as:

➥ Using drainage tiles to remove excess moisture from soil.

➥ Excavating the soft soil and replacing it with a proper base material.

➥ Tilling and turning the soil to encourage drying or hardening.

➥ Using soil separation fabrics to prevent soil from intermixing with base materials.

➥ Using reinforcement grids (geo grids) to even out the weight of the load.

➥ Tilling chemical stabilization into the soil to change the composition to make it stronger.

➥ Applying foam asphalt injections to mimic the characteristics of pavement.

Indianapolis Paving Contractors

Asphalt & Concrete Service 317-549-1833

Call ACI Asphalt and Concrete Inc. at 317-549-1833 for professional pavement repair and installation in Indianapolis, Indiana and its surrounding counties. Owner Lindsey Lewis, and his team of licensed paving contractors, provide a wide range of asphalt and concrete paving services for commercial, industrial, and municipal properties throughout the state. As highly-trained and experienced pavers, you can trust us for quality service at an honest price. Call 317-549-1833 to
request an estimate for Indianapolis
paving services, today.

Learning About Road Surface Markings

Posted on July 12, 2016 by admin

We drive over them, alongside them, behind them, and we obey them. Surface stripes and pavement markings serve a very important purpose in traffic and road systems, and play a major role in the organization, functionality, and safety of drivers and pedestrians. But many drivers are unsure about the different colors, applications, and meanings behind the most common pavement stripes and markings. It is important to know this information so you can be safer on the road. To improve your driving acumen and security, continue reading to learn about pavement stripes and marks.

Asphalt Concrete Paving 317-549-1833

Road Stripes and Markings

Road surface markings and striping is any material or device used to assist or convey official information to motorists and pedestrians. They are either mechanical, non-mechanical, or temporary, and used in several applications, including parking lots, roads, highways, toll booths, school zones, pedestrian crossings, and more. And today, there are new innovative technologies available for road marking systems, such as retro-reflectivity, that lasts longer and costs less to apply. So we can count on reliable traffic and pedestrian surface markings for years to come. Below is a review of some common road markers, and the purpose they serve.

Mechanical Markers

Botts’ Dots – A type of mechanical non-reflective marker that is raised off the ground in the form of small mounds, or “dots.” They are used to indicate the edges of traffic lanes and are commonly used in combination with raised reflective markers. Botts’ dots are also used to alert motorists of highway toll booths, school lanes, and speed limit reductions. Since they are easily damaged by snow plows, they are usually used in areas with warmer climates.

Rumble Strips – If you have ever accidentally veered off the road, then you have probably experienced driving over rumble strips. They are repetitive troughs carved into the pavement (generally 1 cm deep and 10 cm wide) on the edges of roads to alert or awake drivers that are falling asleep or not paying attention. When you drive on rumble strips, your vehicle shakes and vibrates as it moves over the deep ridges.

Raised Reflective Markers – Also called road studs, these markers are reflective, making them more visible at night and in poor weather. They are raised off the ground, usually in the form of dots or small squares, and used as travel lane dividers, median markers, exit slip-road markers.

Non-Mechanical Markers

Paint – The most common form of non-mechanical road markers is paint, sometimes containing retroreflective glass beads. The primary colors of road paint depend largely on locality, but generally include white, yellow, red, blue, and orange. Paint markers are used for a wide variety of purposes in terms of road systems and pavement, including driving lanes, parking lots, handicap parking, no-parking zones, time-restricted parking, loading zones, and much more.

Yellow Lines – Yellow lines are used to mark the center of two-way streets that have two-way traffic lanes. If the center yellow lines are dashes instead of solid lines, you can pass on a two-way street with two-way traffic. However, if they are solid, you cannot. So this means you cannot drive to the left of these lines.

White Lines – White lines are applied in the center and on the shoulder of a two-lane road to advise traffic traveling in your direction. If the lines are solid, you cannot legally pass on the road. If they are broken up into dashes, you can legally pass other vehicles if the way is clear.

ACI Asphalt and Concrete Inc.

Indianapolis Paving 317-549-1833

Call ACI Asphalt and Concrete Inc. at 317-549-1833 for professional pavement installation and repair in Indianapolis, Indiana. Owner, Lindsey Lewis, and his team of licensed and insured pavers, are fully-equipped to manage any size pavement application or installation project for commercial, industrial, and municipal properties. We provide road striping services, as well as, pavement repair, pavement installation, pothole patching, and more. Call 317-549-1833 to speak with a knowledgeable Indianapolis paving contractor, today.

What is Recycled Asphalt Pavement?

Posted on October 22, 2015 by admin

Recycled asphalt pavement, or RAP, is a common paving material used in several applications all over the world. In lamest terms, RAP is old asphalt that has been removed and reprocessed for reuse. It is milled into gravel and mixed with other high-quality, well-graded aggregates coated by asphalt cement. When compressed, it binds back together to form new pavement. It is an effective and eco-friendly selection for driveway, parking lot, and roadway paving.

Continue reading to learn even more helpful and interesting facts about recycled asphalt pavement!

RAP Application

If you are familiar with the application process of standard hot mix asphalt, then you will should have no problem comprehending the application procedures for recycled asphalt pavement (RAP). This is because they are very similar to one another, in the beginning. First comes proper grading and excavation, followed by water runoff planning, debris clearing, and then tact coat application. This type of paving material is best lain with an automated paver and vibratory roller. This allows for efficient and uniform paving results and smoother finishes.

Since RAP still contains many of its natural oils, post-application is naturally finished off when the sun heats the surface, allowing the oils to bind the pavement into one, uniform surface area. This produces much less dust and leaves behind a finer finish.

Many people choose RAP over processed gravel and other paving options because it is long-lasting, cost-effective, and eco-friendly. RAP is sturdy and won’t become muddy or soupy in rain or wet weather. Also, it can make a fantastic base if you ever choose to pave over it with another asphalt material.

It is important to trust a paving professional with RAP application, as well as, any other pavement or sealcoat application. They retain the proper tools, training, and insurance to provide safe and consistent results. DIY paving projects are extremely messy, risky, and time-consuming. It is wise to trust the project to a professional in the field.

Asphalt and Concrete Paving Contractors in Indianapolis

Call ACI Asphalt and Concrete at 317-549-1833 for professional paving repair services in Indianapolis, Indiana. Our licensed road construction contractors provide a wide range of asphalt and concrete work for commercial and industrial properties, including inspections, installation, replacement, repair, and more. We also offer free estimates and consultations, flexible scheduling, references upon request, and more. Best of all, our work is backed by our 100% Satisfaction Guarantee, so you can rest assure that your investment is sound. Request a free quote, today.

Tips for Planning a Parking Lot Expansion

Posted on August 13, 2015 by admin

Parking lot expansion is a common pavement installation undertaking for commercial properties that need more parking space. Also, the addition of new equipment, inventory increases, and vehicles can be plenty reason enough to expand a parking lot as well. Regardless of why you wish or need to expand a commercial or industrial parking lot, it is important to be well-informed of the basics to parking lot expansion ahead of time, and to learn what to expect from your commercial pavers.

Continue reading for a few simple tips for planning a parking lot expansion.

Parking Lot Paving Services 317-549-1833

Parking Lot Installation Basics

Whether you have an asphalt or concrete parking lot, additional parking lot installation and expansion is possible. However, there are a few things to consider before moving forward with parking lot installation or expansion project. With these simple tips in mind, you can better make an informed decision you can rely on.

Here are 3 important tips when planning to expand your parking lot:

❶ Be Aware of Your Parking Lot Pavement Needs

It is important to be informed of all your parking lot’s individual needs. This means discussing drainage, preventative maintenance, seal coating, and more. Ask your paving contractor how new asphalt or concrete is added to expand a parking lot, as well as, how they plan to incorporate the proper drainage solutions for the added surface area. If your current lot has issues, it is wise to discuss those issues with your contractor and have them resolved before new pavement is installed. Find out what all your parking lot needs are with your contractor before signing on the dotted line.

❷ Outsource Professional Pavement Installation

For the most professional parking lot expansion, you will need to hire a well-qualified pavement company. This means they should be licensed, bonded, and insured, with several years of experience. Ask about their equipment and whether or not their employees are certified and pre-screened. All of these and more are indications that they are a well-established and trusted paving company in the local community. You can also look for client reviews online and ask to see completed parking lot jobs they’ve done in the past to see what their skill levels look like.

❸ Learn About Parking Lot Maintenance

Anyone can have a new parking addition added to their existing lot, but the key is to maintain it for as long as possible! If you are investing in a new or expanded parking lot, it is strongly encouraged to learn proper and effective parking lot maintenance. Routine care for parking lots is vital in order to extend the life of your pavement and reduce the need for future repairs. This includes daily sweeping, staying on top of cracks and pothole repairs, and opting for a quality seal coat. Ask your paving contractor for details about parking lot maintenance and care.

Parking Lot Repair and Paving Professionals in Indianapolis

Call ACI Asphalt and Concrete at 317-549-1833 for parking lot repair and installation services in Indianapolis, Indiana. Our licensed road construction contractors provide a wide range of asphalt and concrete work for commercial and industrial properties, including inspections, installation, replacement, repair, and more. We also offer free estimates and consultations, flexible scheduling, references upon request, and more. Best of all, our work is backed by our 100% Satisfaction Guarantee, so you can rest assure that your investment is sound. Request a free quote, today.

The Difference Between Hot Asphalt and Warm Asphalt Mix

Posted on August 6, 2015 by admin

Asphalt is a highly-beneficial paving material that can be used in various applications within the construction industry. There are several types of asphalt mixes, including hot mix asphalt (HMA), warm mix asphalt (WMA), cold mix asphalt, cut-back asphalt concrete, mastic asphalt concrete, and variations of them all. By customizing aggregate material composition, binders, and more, contractors can achieve the proper asphalt pavement mix needed for the job. In this blog, we will discuss the principle differences between the two most popular forms of asphalt: HMA and WMA.

Continue reading to learn more about hot mix asphalt and warm mix asphalt, and what makes them so different.

Commercial & Industrial Paving Contractors — Asphalt Concrete Paving 317-549-1833

Hot Mix Asphalt

Hot mix asphalt is just that: hot. It is poured at a high temperature of 300 to 350 degrees Fahrenheit, and is only applied when outdoor temperatures exceed 40 degrees Fahrenheit because it cools so rapidly. In the United States, it is the most common method of asphalt paving used for high-traffic pavements like highways, roads, interstates, and more. This is largely due to its advantageous qualities. Hot mix asphalt is water and weather resistant, flexible, and environmentally-friendly. Interesting uses for HMA includes environmental liners for places like reservoirs, landfills, and fish hatchery ponds.

Warm Mix Asphalt

Warm mix asphalt is manufactured and shipped at lower temperatures, usually between 200 and 250 degrees Fahrenheit, and it has a slower cooling rate than HMA. This means it can be used in colder seasons or climates for road, highway, and interstate construction. For the same reason, it can be shipped long distances as well. WMA is used in roughly 30 percent of paving projects around the country because of its slow cooling rate, versatility, environmental benefits, and health benefits for workers. Since WMA is poured at lower temperatures, it reduces the amount of dust, smoke, and fumes created when applying HMA. This is safer for workers as well as the surrounding environment. It is also a wise choice for paving in tunnels, especially on a poor air quality day!

Indianapolis Asphalt and Concrete Paving Services

Call ACI Asphalt and Concrete at 317-549-1833 for commercial asphalt paving in Indianapolis, Indiana. Our licensed road construction contractors provide a wide range of asphalt and concrete work for commercial and industrial properties, including inspections, installation, replacement, repair, and more. We also offer free estimates and consultations, flexible scheduling, references upon request, and more. Best of all, our work is backed by our 100% Satisfaction Guarantee, so you can rest assure that your investment is sound. Request a free quote, today.

What is Perpetual Pavement?

Posted on July 14, 2015 by admin

Asphalt is a wonderful and versatile pavement that provides a wide range of benefits, both financial and environmental. The smooth ride, enhanced safety, and appealing luster are just a few of the many admirable attributes of asphalt pavement. But what is perpetual pavement? Is it the same thing? What applications is it used in? For answers to these questions and more, continue reading and eliminate the confusion between perpetual and porous pavement.

Indianapolis Asphalt Seal Coating 317-549-1833

Perpetual Pavement

Perpetual pavement is simply asphalt! However, it is a type of asphalt that combines all the smoothness and safety of asphalt, but in multiple layers. Perpetual pavement uses an advanced design process that lays asphalt in multiple layers to increase durability, strength, and longevity in roads and highways. This makes it perfect for areas with high traffic volume.

The first (bottom) layer of perpetual asphalt is flexible but strong, and resists pliable pressure caused by heavy traffic and more. This prevents the occurrence of cracks forming at the very bottom of pavement foundations.

The permanent structural portion of laying perpetual pavement is finished in the intermediate layer, following the bottom layer. This intermediate layer provides more strength and durability, as well as, extends lifespan of asphalt.

The last layer of perpetual asphalt is the rut-resistant hot-mix asphalt portion. It produces years of lasting resistance and durability that’s well passed the scheduled date for restoration.

The advantages of perpetual pavement services are well-worth the effort. Since the process is quick and efficient, construction times are reduced and traffic is not blocked or delayed for long periods of time. Also, this type of pavement installation provides exceptionally long-lasting strong pavement that is virtually uninfluenced by harsh weather and heavy traffic volume.

Commercial Asphalt and Concrete Paving Service in Indianapolis

Call ACI Asphalt and Concrete at 317-549-1833 for commercial or industrial asphalt installation and repair services in Indianapolis, Indiana. Our licensed road construction contractors provide a wide range of asphalt and concrete work for commercial and industrial properties, including inspections, installation, replacement, repair, and more. We also offer free estimates and consultations, flexible scheduling, references upon request, and more. Best of all, our work is backed by our 100% Satisfaction Guarantee, so you can rest assure that your investment is sound. Request a free quote, today.