The General Process of Concrete Installation

When your commercial property is in need of concrete installation or restoration, it is wise to learn what to expect from the process. Your lot is an investment, so you want to do whatever you can to be prepared to obtain the best possible results. The first place to start is hiring a reputable and experienced paving company to ensure that your concrete install job is carried out precisely to code; otherwise, you can face premature repairs and replacements down the line. After all, the number one cause of concrete defectiveness is poor or improper installation.

Once you hire a licensed, bonded, and insured pavement installation company, your concrete installation process will begin. The process differs from company to company, but the general steps tend to remain universal. Continue below to learn the basic process of professional concrete installation, as well as, who to trust for your concrete paving needs in Indianapolis.

Commercial Concrete Paving 317-549-1833
Commercial Concrete Paving 317-549-1833

Concrete Installation Steps

STEP 1: On-Site Estimate

To begin, a company estimator will come to your property and perform an on-site evaluation. During this evaluation, they will confirm the condition of your current grounds or pavement, and configure a plan for installation. At the end of the evaluation, the estimator will provide a detailed, written quote outlining all of the recommended modifications and work needed for the overall project. For instance, your estimator might tell you at this time that extra work needs to be done to reinforce the ground beneath the installation site since concrete performs better on solid, stable soil.

STEP 2: Site Preparation

Once you agree to have the work done, the paving crews will arrive on the scheduled work day. They will use this initial day to organize all the materials, set up all of the equipment and machinery,and prepare the site for concrete installation. Contractors will typically test the machinery to make sure everything is working properly,and even go over the gravel base a few times to check the quality and condition of their equipment. Once they know their fleets are ready for paving, they can begin any structural work that’s needed, like ground reinforcements and more.

STEP 3: Screeding and Smoothing

Paving contractors are likely to start out with a technique known as “screeding”, which is basically leveling the concrete if any exists on the site already. To do this, pavers use flat boards and other screeding tools to smooth out the concrete after it has been placed to help with flattening. Concrete dries fast, so in this same step, pavers will utilize other tools and techniques to smooth and even out the concrete as it cures.

STEP 4: Curing

Once the concrete is laid and cured, the pavers will then apply a concrete curing agent to the surface. This product is designed to slow down the rate of water-loss over a month’s time, which will render stronger, longer-lasting, and better-looking concrete. It takes 7 to 10 days for newly laid concrete to fully cure. During this time, it is important to keep all foot and vehicular traffic off of it, including animals.

STEP 5: Clean Up and Check Up

When the paving crew is finished with the last step, they will clean up their work site, pack up all of their equipment and machinery, and head off! It is also standard practice for them to implement post-service checkups, both on-site and over the phone.

Professional Concrete Installation Near You

Call ACI Asphalt and Concrete at 317-549-1833 for commercial paving services in Indianapolis, Indiana. Our licensed and qualified paving contractors provide several Indianapolis asphalt and concrete paving services, including pavement repair, sealcoating, road work, commercial paving, industrial paving, and more. Request a free estimate, today!

How to Clean Moldy Concrete

Many people do not think about mold and mildew growing on foundations made from concrete or cement; however, if the conditions are just right, this type of growth can occur. Not only can mold, mildew, and fungus grow within the pores and on the surfaces of concrete foundations, staining is a probable result as well.

Mold and mildew can cause health problems, respiratory complications, and slippery surfaces. This can be dangerous to residents, guests, customers, visitors, and all other persons inhabiting the infected area. These reasons and more are why mold removal for concrete is so vital. Getting rid of mold growth encourages a healthier environment and a more durable foundation.

Continue reading to learn more about mold growth, including how to effectively eliminate it from concrete sidewalks, driveways, and more!

Indianapolis Pavement Repair 317-549-1833
Indianapolis Pavement Repair 317-549-1833

What Causes Mold?

Mold, mildew, and fungus grow in the presence of two principle variables: moisture and a food source. In most cases, these food sources are dirt and dust. Concrete is not capable of fungal growth on its own, but in the perfect conditions of humidity, moisture, and a present food source, mold can quickly grow and thrive for quite some time.

Prolonged weather conditions, water leaks, flooding, and poor insulation can create an environment for concrete mold growth. The combination of moisture and humidity, along with a viable food source, is the perfect formula to house mold and mildew.

Also, concrete is a porous pavement, meaning it has several pores and channels running within it. These pores and microscopic crevices are perfect incubators for fungal growth too. So as mentioned before, given the right conditions, mold can easily grow within and on concrete.

Some conditions are created on a temporary basis, like humid and wet weather mixed with dirt and dust, while others may be an interior issue that requires some extensive renovation or repair.

Cleaning Moldy Concrete

Finding the root of mold growth is the first step in removing it. If the fungus is a result of a larger underlying problem like interior water leaks, then it is vital to correct this issue first, in order to acquire long term mold removal and control. Since concrete is very durable, removing mold is fairly simple and the process is quite easy. Once the mold is removed, it is helpful to keep concrete surfaces that are more susceptible to fungal growth, clean and dust-free.

Here’s how to combat mold and mildew on concrete foundations:

⇒ Purchase an OTC Fungicide or Mold-Killing Detergent

These products can be purchased at any local hardware or home improvement center. You may even find them at your local grocer or superstore. Be sure to choose a higher-end product for optimal results. For a homemade solution, simply mix household bleach and water together, using equal parts.

⇒ Allow the Solution to Set in For Some Time

Apply the solution liberally to the infected areas and allow it to sit for 15 to 30 minutes, depending on the extent of fungal growth. The next step involves scrubbing, but should then be followed with a second application, setting, and scrubbing once again.

⇒ Use Elbow-Grease to Scrub the Fungus Away

It really takes a lot of scrubbing and elbow grease to scrub the mold away. This job is great for the man of the house. Once the solution is applied liberally to the infected areas, use abundant force to scrub and rub away the fungal growth and stains. Rinse the area thoroughly, and repeat the last two steps until you achieve desirable results.

When You Need Concrete Replacement

Call ACI Asphalt and Concrete at 317-549-1833 for commercial and industrial paving services in Indianapolis, Indiana. Our licensed and qualified paving contractors provide several Indianapolis asphalt and concrete paving services, including pavement repair, sealcoating, road work, commercial paving, industrial paving, and more. Request a free estimate, today!

Indianapolis Pavement Repair Company
Indianapolis Pavement Repair Company 317-549-1833

A Few Considerations Regarding the Integrity of Concrete Surfaces

When it comes to choosing between concrete resurfacing and concrete repair, there are a few important considerations to think about before making any final decisions. Choosing the proper solution for concrete renovation can save contractors and property owner’s significant amounts of money and time, and avoid potential do-overs.

Continue reading to learn the questions you should be asking yourself, and your concrete contractor, regarding concrete resurfacing and repair.

Indianapolis Concrete Repair 317-549-1833
Indianapolis Concrete Repair 317-549-1833

Concrete Repair or Concrete Resurfacing

Concrete is a porous, permeable pavement material, which means it can absorb moisture and water. Water enters these pores, freezing and thawing, causing cracks, fissures, crevices, crumbling, and more. Overtime, this exponential accumulation of rain water, winter precipitation, and natural wear and tear from foot and vehicular traffic, causes concrete surfaces to breakdown. In order to combat these problematic variables, it is important to use a high-quality concrete sealer.

Sealcoating is vital for additional and long-term protection against natural elements, harsh weather, changing climates, traffic, and more. Applying a seal coat to a newly paved or repaired concrete surface is safeguarding your investment. As concrete breaks down or deteriorates, property owners might begin to think about renovating or replacing their pavement. At this point, it is wise to think about certain considerations to properly assess whether or not to repair or resurface concrete pavement.

Here are some important questions to ask yourself about your commercial concrete pavements:

What is the Structural Condition of the Concrete?

Is the concrete safe to walk or drive on? Are the cracks larger than a quarter of an inch? Have the concrete slabs moved vertically yet? If the answer to all these questions is no, then a full concrete repair or replacement project is not necessary. Instead, concrete resurfacing can simply fill in the cracks and strengthen the foundation. You can even go above and beyond by adding some upgraded aesthetics to enhance and refresh the appearance of your concrete pavement.

Is the Concrete Sunken or Raised?

When concrete is sunken low into the ground, or raised above the surface level, you might still be able to avoid a full-on concrete repair project. Instead, you may have the option to use a concrete hydraulic leveler to even out the surface, and follow it with concrete resurfacing. Hydraulic concrete levelers drill a 2 to 3 inch hole in sunken concrete, and then inject a lime blend material to raise it back up to the proper level. Follow this with a polymer modified cement treatment for a professional finish.

Is More than 50% of the Concrete’s Integrity Jeopardized?

If at least fifty percent of the concrete surface is deteriorated, cracked, or sunken, concrete repair is the best option. If the thickness of the concrete is eroded or crumbled more than one and a quarter inch, then concrete repair is also the necessary choice.

For accurate industry information and advice regarding asphalt and concrete repair or installation, speak with a licensed pavement repair contractor. They can offer you the most accurate advice for choosing between concrete resurfacing and concrete repair. Be sure to choose a licensed, bonded, and insured pavement repair company with several years of experience in the industry. This will ensure you are receiving honest, educated, and accurate information.

An Indianapolis Pavement Repair Company You Can Trust

Call ACI Asphalt and Concrete at 317-549-1833 for commercial pavement repair and service in Indianapolis and its surrounding areas. Our licensed and qualified paving contractors provide a wide range of asphalt and concrete pavement repair and installation services at the most competitive prices in town, including crack filling, overlays, resurfacing, and sealcoating. Request a free estimate, today!